<bdo id="q6ln4"></bdo>

        <tbody id="q6ln4"><nobr id="q6ln4"><address id="q6ln4"></address></nobr></tbody>

        Welcome to Dongguan Tai Fu Machinery Co., Ltd. official website

        Dongguan Tai Fu Machinery Co., Ltd.

        Dongguan Tai Fu Machinery Co., Ltd.

        Focus on the production and manufacture of injection molding machine for 10 years, national high-tech enterprise

        South China:136-8666-5453

        East China:139-2550-8791

        Contact
        TEL:13686665453

        Contacts:Manager Zeng
        phone:13925508791
        Email:2994331754@qq.com
        address:Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

        history record

        Why High Speed Single Slide Injection Molding Machine does not Close Slowly

        source:   time:2019-07-18   Click:329

        The mould process of high speed single slide injection molding machine can be divided into two kinds: fast and slow. Before closing the mould before it is not connected, the mould closes quickly to shorten the time, and the force required is small. After the contact of the die, it is necessary to use slow speed to prevent the die from forming. Finally, lock after contact with the fixed template. Therefore, closing process is to close the die quickly and slowly. Velocity-pressure ratio refers to relationship between velocity and pressure provided by the closing system on moving template during the movement of mechanism, which is used to analyze the kinematics and dynamics of closing mechanism.

        high speed single slide injection molding machine

        But why does high speed single slide injection molding machine not shut down slowly? Taifu Machinery sorted out three reasons for you and their treatment methods.

        1. Slow pressure and speed of shutdown are adjusted too much. Processing method: adjust its pressure and velocity value.

        2. The position of the slow closing switch is not right or damaged. Processing method: adjust its position or change.

        3. The counterbalance valve is stuck or spring is broken. Processing method: Clean counterbalance valve or replace spring.

        The mould process of high speed single slide injection molding machine is a very important process, which needs to control pressure and speed. The position of proximity switch and so on, otherwise the plastic products will appear flaws such as flying edge.

        This article is an original article of Dongguan Taifu Machinery Co., Ltd. (Official Website: www.dg-taifu.com/www.www.tjhgbot.com). It shall not be reproduced without permission.

        Popular tags:High Speed Single Slide Injection Molding Machine
        CONTACT THE TAIFU

        Contact: Manager Zeng

        Mobile phone:13925508791

        Fax:0769-81929375

        email:2994331754@qq.com

        Address: Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

        Copyrights©2018 Dongguan Tai Fu Machinery Co., Ltd. All Rights Reserved case number:粵ICP備16078114號

          <bdo id="q6ln4"></bdo>

            <tbody id="q6ln4"><nobr id="q6ln4"><address id="q6ln4"></address></nobr></tbody>
            吃饭的时候埋在身体动,网曝门欧美日韩在线视频,香蕉视频5app下载官方,一二三区高清视频,青春娱乐国产精品2,色猫咪AV网站